#include "ScoutManager.h"

#include "MapTools.h"
#include "Micro.h"
#include "OpponentModel.h"
#include "ProductionManager.h"

// This class is responsible for early game scouting.
// It controls any scouting worker and scouting overlord that it is given.

using namespace UAlbertaBot;

ScoutManager::ScoutManager() 
	: _overlordScout(nullptr)
    , _workerScout(nullptr)
	, _scoutStatus("None")
	, _gasStealStatus("None")
	, _scoutCommand(MacroCommandType::None)
	, _overlordAtEnemyBase(false)
	, _scoutUnderAttack(false)
	, _tryGasSteal(false)
	, _enemyGeyser(nullptr)
    , _startedGasSteal(false)
	, _queuedGasSteal(false)
	, _gasStealOver(false)
    , _currentRegionVertexIndex(-1)
    , _previousScoutHP(0)
{
	setScoutTargets();
}

ScoutManager & ScoutManager::Instance() 
{
	static ScoutManager instance;
	return instance;
}

// Target locations are set while we are still looking for the enemy base.
// After the enemy base is found, we unset the targets and go to or ignore the enemy base as appropriate.
// If we have both an overlord and a worker, send them to search different places.
// Guarantee: We only set a target if the scout for the target is set.
void ScoutManager::setScoutTargets()
{
	BWTA::BaseLocation * enemyBase = InformationManager::Instance().getEnemyMainBaseLocation();
	if (enemyBase)
	{
		_overlordScoutTarget = BWAPI::TilePositions::Invalid;
		_workerScoutTarget = BWAPI::TilePositions::Invalid;
		return;
	}

	if (!_overlordScout)
	{
		_overlordScoutTarget = BWAPI::TilePositions::Invalid;
	}
	if (!_workerScout)
	{
		_workerScoutTarget = BWAPI::TilePositions::Invalid;
	}

	// Unset any targets that we have searched.
	for (BWAPI::TilePosition pos : BWAPI::Broodwar->getStartLocations())
	{
		if (BWAPI::Broodwar->isExplored(pos))
		{
			// We've seen it. No need to look there any more.
			if (_overlordScoutTarget == pos)
			{
				_overlordScoutTarget = BWAPI::TilePositions::Invalid;
			}
			if (_workerScoutTarget == pos)
			{
				_workerScoutTarget = BWAPI::TilePositions::Invalid;
			}
		}
	}

	// Set any target that we need to search.
	for (BWAPI::TilePosition pos : BWAPI::Broodwar->getStartLocations())
	{
		if (!BWAPI::Broodwar->isExplored(pos))
		{
			if (_overlordScout && !_overlordScoutTarget.isValid() && _workerScoutTarget != pos)
			{
				_overlordScoutTarget = pos;
			}
			else if (_workerScout && !_workerScoutTarget.isValid() && _overlordScoutTarget != pos)
			{
				_workerScoutTarget = pos;
			}
		}
	}

	// NOTE There cannot be only one target. We found the base, or there are >= 2 possibilities.
	//      If there is one place left to search, then the enemy base is there and we know it,
	//      because InformationManager infers the enemy base position by elimination.
}

// Should we send out a worker scout now?
bool ScoutManager::shouldScout()
{
	// If we're stealing gas, it doesn't matter what the scout command is: We need to send a worker.
	if (_tryGasSteal)
	{
		return true;
	}

	if (_scoutCommand == MacroCommandType::None)
	{
		return false;
	}

	// If we only want to find the enemy base location and we already know it, don't send a worker.
	if ((_scoutCommand == MacroCommandType::ScoutIfNeeded || _scoutCommand == MacroCommandType::ScoutLocation))
	{
		return !InformationManager::Instance().getEnemyMainBaseLocation();
	}

	return true;
}

void ScoutManager::update()
{
	// If we're not scouting now, minimum effort.
	if (!_workerScout && !_overlordScout)
	{
		return;
	}

	// If a scout is gone, admit it.
	if (_workerScout &&
		(!_workerScout->exists() || _workerScout->getHitPoints() <= 0 ||   // it died (or became a zerg extractor)
		_workerScout->getPlayer() != BWAPI::Broodwar->self()))             // it got mind controlled!
	{
		_workerScout = nullptr;
	}
	if (_overlordScout &&
		(!_overlordScout->exists() || _overlordScout->getHitPoints() <= 0 ||   // it died
		_overlordScout->getPlayer() != BWAPI::Broodwar->self()))               // it got mind controlled!
	{
		_overlordScout = nullptr;
	}

	// Find out if the opponent model wants us to steal gas.
	if (_workerScout && OpponentModel::Instance().getRecommendGasSteal())
	{
		_tryGasSteal = true;
	}

	// If we only want to locate the enemy base and we have, release the scout worker.
	if (_scoutCommand == MacroCommandType::ScoutLocation &&
		InformationManager::Instance().getEnemyMainBaseLocation() &&
		!wantGasSteal())
	{
		releaseWorkerScout();
	}

	// If we're done with a gas steal and we don't want to keep scouting, release the worker.
	// If we're zerg, the worker may have turned into an extractor. That is handled elsewhere.
	if (_scoutCommand == MacroCommandType::None && _gasStealOver)
	{
		releaseWorkerScout();
	}

    // Calculate waypoints around the enemy base if we expect to need them.
	// We use these to go directly to the enemy base if its location is known,
	// as well as to run circuits around it.
	if (_workerScout && _enemyRegionVertices.empty() && InformationManager::Instance().getEnemyMainBaseLocation())
	{
        calculateEnemyRegionVertices();

		// It's possible for BWTA to fail and give us no region.
		// Workaround for now: Give up on worker scouting.
		if (_enemyRegionVertices.empty())
		{
			releaseWorkerScout();
		}
    }

	// Do the actual scouting. Also steal gas if called for.
	setScoutTargets();
	if (_workerScout)
	{
		bool moveScout = true;
		if (wantGasSteal())              // implies !_gasStealOver
		{
			if (gasSteal())
			{
				moveScout = false;
			}
			else if (_queuedGasSteal)    // gas steal queued but not finished
			{
				// We're in the midst of stealing gas. Let BuildingManager control the worker.
				moveScout = false;
				_gasStealStatus = "Stealing gas";
			}
		}
		else
		{
			if (_gasStealOver)
			{
				_gasStealStatus = "Finished or failed";
			}
			else
			{
				_gasStealStatus = "Not planned";
			}
		}
		if (moveScout)
		{
			moveGroundScout(_workerScout);
		}
	}
	else if (_gasStealOver)
	{
		// We get here if we're stealing gas as zerg when the worker is turns into an extractor.
		_gasStealStatus = "Finished or failed";
	}

	if (_overlordScout)
	{
		moveAirScout(_overlordScout);
	}

    drawScoutInformation(200, 320);
}

// If zerg, our first overlord is used to scout immediately at the start of the game.
void ScoutManager::setOverlordScout(BWAPI::Unit unit)
{
	_overlordScout = unit;
}

// The worker scout is assigned only when it is time to go scout.
void ScoutManager::setWorkerScout(BWAPI::Unit unit)
{
    // if we have a previous worker scout, release it back to the worker manager
	releaseWorkerScout();

    _workerScout = unit;
    WorkerManager::Instance().setScoutWorker(_workerScout);
}

// Send the worker scout home.
void ScoutManager::releaseWorkerScout()
{
	if (_workerScout)
	{
		WorkerManager::Instance().finishedWithWorker(_workerScout);
		_workerScout = nullptr;
	}
}

void ScoutManager::setScoutCommand(MacroCommandType cmd)
{
	UAB_ASSERT(
		cmd == MacroCommandType::Scout ||
		cmd == MacroCommandType::ScoutIfNeeded ||
		cmd == MacroCommandType::ScoutLocation ||
		cmd == MacroCommandType::ScoutOnceOnly,
		"bad scout command");

	_scoutCommand = cmd;
}

void ScoutManager::drawScoutInformation(int x, int y)
{
    if (!Config::Debug::DrawScoutInfo)
    {
        return;
    }

    BWAPI::Broodwar->drawTextScreen(x, y, "Scout info: %s", _scoutStatus.c_str());
    BWAPI::Broodwar->drawTextScreen(x, y+10, "Gas steal: %s", _gasStealStatus.c_str());
	std::string more = "not yet";
	if (_scoutCommand == MacroCommandType::Scout)
	{
		more = "and stay";
	}
	else if (_scoutCommand == MacroCommandType::ScoutLocation)
	{
		more = "location";
	}
	else if (_scoutCommand == MacroCommandType::ScoutOnceOnly)
	{
		more = "once around";
	}
	else if (_scoutCommand == MacroCommandType::ScoutWhileSafe)
	{
		more = "while safe";
	}
	else if (wantGasSteal())
	{
		more = "to steal gas";
	}
	// NOTE "go scout if needed" doesn't need to be represented here.
	BWAPI::Broodwar->drawTextScreen(x, y + 20, "Go scout: %s", more.c_str());

    for (size_t i(0); i < _enemyRegionVertices.size(); ++i)
    {
        BWAPI::Broodwar->drawCircleMap(_enemyRegionVertices[i], 4, BWAPI::Colors::Green, false);
        BWAPI::Broodwar->drawTextMap(_enemyRegionVertices[i], "%d", i);
    }
}

// Move the worker scout.
void ScoutManager::moveGroundScout(BWAPI::Unit scout)
{
	const int scoutDistanceThreshold = 30;    // in tiles

	if (_workerScoutTarget.isValid())
	{
		// The target is valid exactly when we are still looking for the enemy base.
		_scoutStatus = "Seeking enemy base";
		Micro::Move(_workerScout, BWAPI::Position(_workerScoutTarget));
	}
	else
	{
		const BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

		UAB_ASSERT(enemyBaseLocation, "no enemy base");

		int scoutDistanceToEnemy = MapTools::Instance().getGroundTileDistance(scout->getPosition(), enemyBaseLocation->getPosition());
		bool scoutInRangeOfenemy = scoutDistanceToEnemy <= scoutDistanceThreshold;

		// we only care if the scout is under attack within the enemy region
		// this ignores if their scout worker attacks it on the way to their base
		int scoutHP = scout->getHitPoints() + scout->getShields();
		if (scoutHP < _previousScoutHP)
		{
			_scoutUnderAttack = true;
		}
		_previousScoutHP = scoutHP;

		if (!scout->isUnderAttack() && !enemyWorkerInRadius())
		{
			_scoutUnderAttack = false;
		}

		if (scoutInRangeOfenemy)
		{
			if (_scoutUnderAttack)
			{
				_scoutStatus = "Under attack, fleeing";
				followPerimeter();
			}
			else
			{
				BWAPI::Unit closestWorker = enemyWorkerToHarass();

				// If configured and reasonable, harass an enemy worker.
				if (Config::Strategy::ScoutHarassEnemy && closestWorker && !wantGasSteal())
				{
					_scoutStatus = "Harass enemy worker";
					_currentRegionVertexIndex = -1;
					Micro::AttackUnit(scout, closestWorker);
				}
				// otherwise keep circling the enemy region
				else
				{
					_scoutStatus = "Following perimeter";
					followPerimeter();
				}
			}
		}
		// if the scout is not in the enemy region
		else if (_scoutUnderAttack)
		{
			_scoutStatus = "Under attack, fleeing";
			followPerimeter();
		}
		else
		{
			_scoutStatus = "Enemy located, going there";
			followPerimeter();    // goes toward the first waypoint inside the enemy base
		}
	}
}

// Move the overlord scout.
void ScoutManager::moveAirScout(BWAPI::Unit scout)
{
	// get the enemy base location, if we have one
	// Note: In case of an enemy proxy or weird map, this might be our own base. Roll with it.
	const BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

	if (enemyBaseLocation)
	{
		// We know where the enemy base is.
		_overlordScoutTarget = BWAPI::TilePositions::Invalid;    // it's only set while we are seeking the enemy base
		if (!_overlordAtEnemyBase)
		{
			if (!_workerScout)
			{
				_scoutStatus = "Overlord to enemy base";
			}
			Micro::Move(_overlordScout, enemyBaseLocation->getPosition());
			if (_overlordScout->getDistance(enemyBaseLocation->getPosition()) < 8)
			{
				_overlordAtEnemyBase = true;
			}
		}
		if (_overlordAtEnemyBase)
		{
			if (!_workerScout)
			{
				_scoutStatus = "Overlord at enemy base";
			}
			// TODO Probably should patrol around the enemy base to see more.
		}
	}
	else
	{
		// We haven't found the enemy base yet.
		if (!_workerScout)   // give the worker priority in reporting status
		{
			_scoutStatus = "Overlord scouting";
		}

		if (_overlordScoutTarget.isValid())
		{
			Micro::Move(_overlordScout, BWAPI::Position(_overlordScoutTarget));
		}
	}
}

void ScoutManager::followPerimeter()
{
	int previousIndex = _currentRegionVertexIndex;

    BWAPI::Position fleeTo = getFleePosition();

	if (Config::Debug::DrawScoutInfo)
	{
		BWAPI::Broodwar->drawCircleMap(fleeTo, 5, BWAPI::Colors::Red, true);
	}

	// We've been told to circle the enemy base only once.
	if (_scoutCommand == MacroCommandType::ScoutOnceOnly && !wantGasSteal())
	{
		// NOTE previousIndex may be -1 if we're just starting the loop.
		if (_currentRegionVertexIndex < previousIndex)
		{
			releaseWorkerScout();
			return;
		}
	}

	Micro::Move(_workerScout, fleeTo);
}

// Called only when a gas steal is requested.
// Return true to say that gas stealing controls the worker, and
// false if the caller gets control.
bool ScoutManager::gasSteal()
{
	BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();
	if (!enemyBaseLocation)
	{
		_gasStealStatus = "Enemy base not found";
		return false;
	}

	_enemyGeyser = getTheEnemyGeyser();
	if (!_enemyGeyser)
	{
		// No need to set status. It will change on the next frame.
		_gasStealOver = true;
		return false;
	}

	// The conditions are met. Do it!
	_startedGasSteal = true;

	if (_enemyGeyser->isVisible() && _enemyGeyser->getType() != BWAPI::UnitTypes::Resource_Vespene_Geyser)
	{
		// We can see the geyser and it has become something else.
		// That should mean that the geyser has been taken since we first saw it.
		_gasStealOver = true;    // give up
		// No need to set status. It will change on the next frame.
		return false;
	}
	else if (_enemyGeyser->isVisible() && _workerScout->getDistance(_enemyGeyser) < 300)
	{
		// We see the geyser. Queue the refinery, if it's not already done.
		// We can't rely on _queuedGasSteal to know, because the queue may be cleared
		// if a surprise occurs.
		// Therefore _queuedGasSteal affects mainly the debug display for the UI.
		if (!ProductionManager::Instance().isGasStealInQueue())
		{
			//BWAPI::Broodwar->printf("queueing gas steal");
			// NOTE Queueing the gas steal orders the building constructed.
			// Control of the worker passes to the BuildingManager until it releases the
			// worker with a call to gasStealOver().
			ProductionManager::Instance().queueGasSteal();
			_queuedGasSteal = true;
			// Regardless, make sure we are moving toward the geyser.
			// It makes life easier on the building manager.
			Micro::Move(_workerScout, _enemyGeyser->getInitialPosition());
		}
		_gasStealStatus = "Stealing gas";
	}
	else
	{
		// We don't see the geyser yet. Move toward it.
		Micro::Move(_workerScout, _enemyGeyser->getInitialPosition());
		_gasStealStatus = "Moving to steal gas";
	}
	return true;
}

// Choose an enemy worker to harass, or none.
BWAPI::Unit ScoutManager::enemyWorkerToHarass() const
{
	// First look for any enemy worker that is building.
	for (const auto unit : BWAPI::Broodwar->enemy()->getUnits())
	{
		if (unit->getType().isWorker() && unit->isConstructing())
		{
			return unit;
		}
	}

	BWAPI::Unit enemyWorker = nullptr;
	int maxDist = 500;    // ignore any beyond this range

	// Failing that, find the enemy worker closest to the gas.
	BWAPI::Unit geyser = getAnyEnemyGeyser();
	if (geyser)
	{
		for (const auto unit : BWAPI::Broodwar->enemy()->getUnits())
		{
			if (unit->getType().isWorker())
			{
				int dist = unit->getDistance(geyser->getInitialPosition());

				if (dist < maxDist)
				{
					maxDist = dist;
					enemyWorker = unit;
				}
			}
		}
	}

	return enemyWorker;
}

// Used in choosing an enemy worker to harass.
// Find an enemy geyser and return it, if there is one.
BWAPI::Unit ScoutManager::getAnyEnemyGeyser() const
{
	BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

	BWAPI::Unitset geysers = enemyBaseLocation->getGeysers();
	if (geysers.size() > 0)
	{
		return *(geysers.begin());
	}

	return nullptr;
}

// Used in stealing gas.
// If there is exactly 1 geyser in the enemy base and it may be untaken, return it.
// If 0 we can't steal it, and if >1 then it's no use to steal one.
BWAPI::Unit ScoutManager::getTheEnemyGeyser() const
{
	BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

	BWAPI::Unitset geysers = enemyBaseLocation->getGeysers();
	if (geysers.size() == 1)
	{
		BWAPI::Unit geyser = *(geysers.begin());
		// If the geyser is visible, we may be able to reject it as already taken.
		// TODO get the type from InformationManager, which may remember
		if (!geyser->isVisible() || geyser->getType() == BWAPI::UnitTypes::Resource_Vespene_Geyser)
		{
			// We see it is untaken, or we don't see the geyser. Assume the best.
			return geyser;
		}
	}

	return nullptr;
}

bool ScoutManager::enemyWorkerInRadius()
{
	for (const auto unit : BWAPI::Broodwar->enemy()->getUnits())
	{
		if (unit->getType().isWorker() && (unit->getDistance(_workerScout) < 300))
		{
			return true;
		}
	}

	return false;
}

int ScoutManager::getClosestVertexIndex(BWAPI::Unit unit)
{
    int closestIndex = -1;
    int closestDistance = 10000000;

    for (size_t i(0); i < _enemyRegionVertices.size(); ++i)
    {
        int dist = unit->getDistance(_enemyRegionVertices[i]);
        if (dist < closestDistance)
        {
            closestDistance = dist;
            closestIndex = i;
        }
    }

    return closestIndex;
}

BWAPI::Position ScoutManager::getFleePosition()
{
    BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

    // if this is the first flee, we will not have a previous perimeter index
    if (_currentRegionVertexIndex == -1)
    {
        // so return the closest position in the polygon
        int closestPolygonIndex = getClosestVertexIndex(_workerScout);

        UAB_ASSERT_WARNING(closestPolygonIndex != -1, "Couldn't find a closest vertex");

        if (closestPolygonIndex == -1)
        {
            return BWAPI::Position(BWAPI::Broodwar->self()->getStartLocation());
        }

        // set the current index so we know how to iterate if we are still fleeing later
        _currentRegionVertexIndex = closestPolygonIndex;
        return _enemyRegionVertices[closestPolygonIndex];
    }

    // if we are still fleeing from the previous frame, get the next location if we are close enough
    double distanceFromCurrentVertex = _enemyRegionVertices[_currentRegionVertexIndex].getDistance(_workerScout->getPosition());

    // keep going to the next vertex in the perimeter until we get to one we're far enough from to issue another move command
    while (distanceFromCurrentVertex < 128)
    {
        _currentRegionVertexIndex = (_currentRegionVertexIndex + 1) % _enemyRegionVertices.size();

        distanceFromCurrentVertex = _enemyRegionVertices[_currentRegionVertexIndex].getDistance(_workerScout->getPosition());
    }

    return _enemyRegionVertices[_currentRegionVertexIndex];
}

// NOTE This algorithm sometimes produces bizarre paths when unbuildable tiles
//      are found deep inside the enemy base.
// TODO Eventually replace with real-time pathing that tries to see as much as possible
//      while remaining safe.
void ScoutManager::calculateEnemyRegionVertices()
{
    BWTA::BaseLocation * enemyBaseLocation = InformationManager::Instance().getEnemyMainBaseLocation();

    if (!enemyBaseLocation)
    {
        return;
    }

    BWTA::Region * enemyRegion = enemyBaseLocation->getRegion();

    if (!enemyRegion)
    {
		BWAPI::Broodwar->printf("enemy base but no enemy region");
        return;
    }

    const BWAPI::Position basePosition = BWAPI::Position(BWAPI::Broodwar->self()->getStartLocation());
    const std::vector<BWAPI::TilePosition> & closestTobase = MapTools::Instance().getClosestTilesTo(basePosition);

    std::set<BWAPI::Position> unsortedVertices;

    // check each tile position
	for (size_t i(0); i < closestTobase.size(); ++i)
	{
		const BWAPI::TilePosition & tp = closestTobase[i];

		if (BWTA::getRegion(tp) != enemyRegion)
		{
			continue;
		}

		// a tile is 'on an edge' unless
		// 1) in all 4 directions there's a tile position in the current region
		// 2) in all 4 directions there's a buildable tile
		bool edge =
			   BWTA::getRegion(BWAPI::TilePosition(tp.x + 1, tp.y)) != enemyRegion || !BWAPI::Broodwar->isBuildable(BWAPI::TilePosition(tp.x + 1, tp.y))
			|| BWTA::getRegion(BWAPI::TilePosition(tp.x, tp.y + 1)) != enemyRegion || !BWAPI::Broodwar->isBuildable(BWAPI::TilePosition(tp.x, tp.y + 1))
			|| BWTA::getRegion(BWAPI::TilePosition(tp.x - 1, tp.y)) != enemyRegion || !BWAPI::Broodwar->isBuildable(BWAPI::TilePosition(tp.x - 1, tp.y))
			|| BWTA::getRegion(BWAPI::TilePosition(tp.x, tp.y - 1)) != enemyRegion || !BWAPI::Broodwar->isBuildable(BWAPI::TilePosition(tp.x, tp.y - 1));

		// push the tiles that aren't surrounded
		if (edge && BWAPI::Broodwar->isBuildable(tp))
		{
			if (Config::Debug::DrawScoutInfo)
			{
				int x1 = tp.x * 32 + 2;
				int y1 = tp.y * 32 + 2;
				int x2 = (tp.x + 1) * 32 - 2;
				int y2 = (tp.y + 1) * 32 - 2;

				BWAPI::Broodwar->drawTextMap(x1 + 3, y1 + 2, "%d", MapTools::Instance().getGroundTileDistance(BWAPI::Position(tp), basePosition));
				BWAPI::Broodwar->drawBoxMap(x1, y1, x2, y2, BWAPI::Colors::Green, false);
			}

			unsortedVertices.insert(BWAPI::Position(tp) + BWAPI::Position(16, 16));
		}
	}

    std::vector<BWAPI::Position> sortedVertices;
    BWAPI::Position current = *unsortedVertices.begin();

    _enemyRegionVertices.push_back(current);
    unsortedVertices.erase(current);

    // while we still have unsorted vertices left, find the closest one remaining to current
    while (!unsortedVertices.empty())
    {
        double bestDist = 1000000;
        BWAPI::Position bestPos;

        for (const BWAPI::Position & pos : unsortedVertices)
        {
            double dist = pos.getDistance(current);

            if (dist < bestDist)
            {
                bestDist = dist;
                bestPos = pos;
            }
        }

        current = bestPos;
        sortedVertices.push_back(bestPos);
        unsortedVertices.erase(bestPos);
    }

    // let's close loops on a threshold, eliminating death grooves
    int distanceThreshold = 100;

    while (true)
    {
        // find the largest index difference whose distance is less than the threshold
        int maxFarthest = 0;
        int maxFarthestStart = 0;
        int maxFarthestEnd = 0;

        // for each starting vertex
        for (int i(0); i < (int)sortedVertices.size(); ++i)
        {
            int farthest = 0;
            int farthestIndex = 0;

            // only test half way around because we'll find the other one on the way back
            for (size_t j(1); j < sortedVertices.size()/2; ++j)
            {
                int jindex = (i + j) % sortedVertices.size();
            
                if (sortedVertices[i].getDistance(sortedVertices[jindex]) < distanceThreshold)
                {
                    farthest = j;
                    farthestIndex = jindex;
                }
            }

            if (farthest > maxFarthest)
            {
                maxFarthest = farthest;
                maxFarthestStart = i;
                maxFarthestEnd = farthestIndex;
            }
        }
        
        // stop when we have no long chains within the threshold
        if (maxFarthest < 4)
        {
            break;
        }

        std::vector<BWAPI::Position> temp;

        for (size_t s(maxFarthestEnd); s != maxFarthestStart; s = (s+1) % sortedVertices.size())
        {
            temp.push_back(sortedVertices[s]);
        }

        sortedVertices = temp;
    }

    _enemyRegionVertices = sortedVertices;
}